The basic principle of the dry cleaning method originates from the grid blasting industry, but has been specifically adapted for this plant cleaning application. We have our specially developed machines. We carefully chosen the combination of jet pressure and medium, therefore there will be no degradation of the base material or surfaces, and only the dirt will be completely removed. It not harm the instruments, sealing and bearings. This will result in a clean surface everywhere. The chosen abrasive is non- corrosive and also environmentally friendly. Furthermore, it dissolves in water, which means it completely disappears.

Advantages:

• It can remove the oil, bitumen, limescale, burnt contamination and etc. too.
• There is no water load or corrosive effect on the directly affected surfaces
• Contamination are removed from the surface by the abrasive used
• The abrasive is degradable, non-corrosive and has no harmful effects on humans and the environment
• The carefully selected combination of pressure and medium does not damage the material of the furnace
• Our teams are self-supporting, so the service does not require any resources from the customer
• It can be used in winter time, below 0 °C
• It not harm the instrument, bearing, sealing, etc.
• It increase the efficiency of the furnace significantly

Main sectors:

• Refineries
• Chemical / Petrochemichal industry,
• Energetics (Power plants, heating plants)
• Waste disposal, waste burning
• Steel and paper industry
• Automotive industry

For all industrial sector who need to remove difficult to remove dirt in a cost-effective and fast manner.